Apply Online

Profile

I am a mechanical engineer with a strong passion for developing innovative medical devices. Before embarking on this journey, I focused entirely on honing my skills in mechanical engineering. Throughout my career, I've been dedicated to research, specializing in areas such as computer-aided design, computer-aided manufacturing, reverse engineering, and non-traditional machining techniques. I've worked at various research laboratories, both independently and as a leader of research groups. My expertise lies in collaborating with fellow researchers and fostering teamwork to enhance production efficiency and quality.

Profile Links

Education

Year Degree Board / University
2020 PhD Mechanical Engineering -- (Doctorate Degree) Griffith University, Australia 🇦🇺
2015 MS in Mechanical Engineering -- (Master/ MS (18 Years) Degree) Yeungnam University, South Korea 🇰🇷
2011 B.Sc. Mechanical Engineering -- (Bachelor (16 Years) Degree) Bahauddin Zakariya University, Pakistan 🇵🇰
Load More

Experience

From To Post Held Organization
2020 2020 Assistant Professor Pakistan Institute of Engineering and Technology
2020 2023 Assistant Professor Khwaja Fareed UEIT
2023 Continue Assistant Professor University of Sargodha
Load More

Research Interests

Nerve Regeneration
Medical Implants
Engineering Automation
Scaffold Design
Engineering Materials

Fellowships

HEC Approved PhD Supervisor
Registered with Pakistan Engineering Council

Publications

    Research Journal


  • Sahil Orangzeb, Mumtaz A. Qaisrani, M. Basit Shafiq, N. Ahmed, M. Sana Ullah Sahar, Sana Ullah, Muhammad Umer Farooq and Fang Jiabin , 2023 , Potential Assessment and Economic Analysis of Concentrated Solar Power against Solar Photovoltaic Technology , International Journal of Energy Research , 2023, , Web Link : https://doi.org/10.1155/2023/3611318
  • M. Ijaz Khan, S. M. Junaid Zaidi, M. Sana Ullah Sahar, S. S. A. Gillani, Mumtaz A. Qaisrani, M. Umer Farooq , 2023 , Effect of Stress on Electronic, Optical, Elastic, and Mechanical Properties of Potassium Tantalum Oxide (KTaO3): A DFT Study , Journal of Electronic Materials , 1, 1, , Web Link : https://doi.org/10.1007/s11664-023-10484-w
  • A. Abdullah, S.M. Junaid Zaidi, M. Ijaz Khan, M. Sana Ullah Sahar, A.S. Saleemi , 2023 , Assimilation of electronic, elastic, mechanical, optical, and thermal profiles in metal halide perovskite CsPbCl3, for optoelectronic applications. , Computational Condensed Matter , 35, , Web Link : https://doi.org/10.1016/j.cocom.2023.e00804

    • Chapters Contributed


  • S. S. Farooq, Muhammad F. Shah, Muhammad S. Sahar, Ghias M. Khan, Zareena Kausar and Muhammad U. Farooq (2023). Internet of Things Advancements and Challenges in Manufacturing Industries. In Machine Tools - An Industry 4.0 Perspective ( 1 ed, pp. 49- 56 ).
  • S M Junaid Zaidi, M Ijaz Khan, S. S A Gillani, M. Sana Ullah Sahar, Sana Ullah and Muhammad Tanveer , 2022 , A comprehensive DFT study to evaluate the modulation in the band gap, elastic, and optical behaviour of CsPbBr3 under the effect of stress. , Materials Research Express , 9, , Web Link : https://doi.org/10.1088/2053-1591/aca645
  • M. Sohail Shah, Sana Ullah, G. H. Tariq, M. Sana Ullah Sahar, G. Asghar & M. Anis-ur-Rehman , 2022 , Thickness-Dependent Physical Properties of Tin Sulphide Thin Films for an Efficient Sunlight-Absorbing Layer. , Journal of Electronic Materials , 35, , Web Link : https://doi.org/10.1007/s11664-022-09881-4
  • Muhammad Sana Ullah Sahar, Tamer Mettyas, Megha Shah, Randy Bindra, Matthew Barton , 2022 , Histological, immunohistochemical, and morphometric analysis of negative pressure-assisted in-vivo nerve stretch-growth. , Neuroscience Letters , 782, , Web Link : https://doi.org/10.1016/j.neulet.2022.136687
  • B. Yousaf, T. Manzoor, M. A. Qaisrani, Ijaz Khan, M. Sana Ullah Sahar, W. Tahir , 2022 , Investigation of influence of elbow on pump inlet flow behaviour in cavitating flow. , Engineering Failure Analysis , 137, , Web Link : https://doi.org/10.1016/j.engfailanal.2022.106420
  • Bilal Yousaf, Mumtaz A. Qaisrani, M. Ijaz Khan, M. Sana Ullah Sahar, W. Tahir , 2022 , Numerical and experimental analysis of the cavitation and study of flow characteristics in ball valve. , Nonlinear Engineering , 10, , Web Link : https://doi.org/10.1515/nleng-2021-0044
  • T. Mettyas, M. Barton, M. Sana Ullah Sahar, F. Lawrence, Sanchez-Herrero, Alvaro, M. Shah, J. St. Jhons, R. Bindra , 2021 , Negative Pressure Neurogenesis: A novel approach to accelerate nerve regeneration after complete peripheral nerve transection. , Plastic and Reconstructive Surgery - Global Open , 9, , Web Link : https://doi.org/10.1097/GOX.0000000000003568
  • Muhammad Sana Ullah Sahar, Matthew Barton, Geoffrey Tansley , 2020 , A systematic review of the effectiveness of cell-based therapy in repairing peripheral nerve gap defects. , Prosthesis , 2, , Web Link : https://doi.org/10.3390/prosthesis2030014
  • M. Sana Ullah Sahar, Matthew Barton, Geoffrey Tansley , 2020 , Design and fabrication of a nerve-stretching device for in vivo mechanotransduction of peripheral nerve fibers. , HardwareX , 7, , Web Link : https://doi.org/10.1016/j.ohx.2020.e00093
  • M. Sana Ullah Sahar, Tamer Mettyas, Matthew Barton , 2019 , Development of a nerve stretcher for in vivo stretching of nerve fibres. , Biomedical Physics & Engineering Express , 5, , Web Link : https://doi.org/10.1088/2057-1976/ab2ca7
  • M. Sana Ullah Sahar, M. Barton, G. Tansley , 2019 , Bridging larger gaps in peripheral nerves using neural prosthetics and physical therapeutic agents. , Neural Regeneration Research , 14, , Web Link : https://doi.org/10.4103/1673-5374.251186
  • Imran Muhammad, Tayyaba Khatoon, M. Sana Ullah Sahar, Tae Jo Ko , 2018 , Development of empirical model for biomachining to improve machinability and surface roughness of polycrystalline copper. , International Journal of Precision Engineering and Manufacturing-Green Technology , 5, , Web Link : https://doi.org/10.1007/s40684-018-0020-y
  • M. Imran, Agung S. Saragih, M. Sana Ullah Sahar, Tae Jo Ko , 2016 , Digital maskless lithography capabilities for surface texturing with biomachining. , International Journal of Advanced Manufacturing Technology , 89, , Web Link : https://doi.org/10.1007/s00170-016-9317-6
  • M. Sana Ullah Sahar , 2016 , Slope change of surface texturing pattern using grinding. , Journal of the Korean Society of Manufacturing Process Engineers , 1, , Web Link : https://doi.org/10.14775/ksmpe.2016.15.4.008
  • M. Sana Ullah Sahar, M. Imran, K. T. Jo , 2016 , Optimal strategy to deal with decision making problems in machine tools remanufacturing. , International Journal of Precision Engineering and Manufacturing-Green Technology , 3, , Web Link : https://doi.org/10.1007/s40684-016-0003-9
  • Imran Muhammad, Sahar M. Sana Ullah, Do Sup Han & Tae Jo Ko , 2015 , Selection of optimum process parameters of biomachining for maximum metal removal rate. , International Journal of Precision Engineering and Manufacturing-Green Technology , 2, , Web Link : https://doi.org/10.1007/s40684-015-0037-4
Load More

Projects

Type Sub-type Title From To Role
Research Final Project Development of an indigenous portable ventilator system. 2022 2023 Principal Investigator
Research Final Project Negative pressure neurogenesis. 2018 2019 Co Principal Investigator
Research Final Project Stimulate and facilitate nerve growth after complete transection injury. 2017 2018 Co Principal Investigator
Research Final Project Design and fabrication of a biodegradable nerve prosthesis to accelerate the quasi-static nerve growth rate across longer segmental defects in peripheral nerves. 2021 2024 Principal Investigator
Research Final Project Development of a 3D simulation software for predicting surface textures on non-planar surfaces by grinding. 2015 2016 Principal Investigator
Load More
Important Links
Faculty